Subject: Missing comment terminator in autoconfig (#135)
Index:	sys/autoconfig/uprobe.c 2.11BSD

Description:
	There is a missing comment terminator in autoconfig module
	which defines the internal probe routine table.

Repeat-By:
	Examination of the source, or note that the 'rk' entry is not
	included.

Fix:
	Apply the following patch, recompile and install the autoconfig
	program.
==========================================================================
*** /usr/src/sys/autoconfig/uprobe.c.old	Sat Nov 21 00:22:54 1992
--- /usr/src/sys/autoconfig/uprobe.c	Wed Jun 16 08:37:58 1993
***************
*** 3,9 ****
   * All rights reserved.  The Berkeley software License Agreement
   * specifies the terms and conditions for redistribution.
   *
!  *	@(#)uprobe.c	2.0 (2.11BSD GTE) 11/20/92
   */
  
  /*
--- 3,9 ----
   * All rights reserved.  The Berkeley software License Agreement
   * specifies the terms and conditions for redistribution.
   *
!  *	@(#)uprobe.c	2.1 (2.11BSD GTE) 6/16/93
   */
  
  /*
***************
*** 29,35 ****
  UPROBE uprobe[] = {
  	"hk",	hkprobe,	/* hk -- rk611, rk06/07 */
  	"hp",	xpprobe,	/* hp -- rjp04/06, rwp04/06 */
! 	"ra",	raprobe,	/* ra -- MSCP
  	"rk",	rkprobe,	/* rk -- rk05 */
  	"rl",	rlprobe,	/* rl -- rl01/02 */
  	"si",	siprobe,	/* si -- SI 9500 for CDC 9766 */
--- 29,35 ----
  UPROBE uprobe[] = {
  	"hk",	hkprobe,	/* hk -- rk611, rk06/07 */
  	"hp",	xpprobe,	/* hp -- rjp04/06, rwp04/06 */
! 	"ra",	raprobe,	/* ra -- MSCP */
  	"rk",	rkprobe,	/* rk -- rk05 */
  	"rl",	rlprobe,	/* rl -- rl01/02 */
  	"si",	siprobe,	/* si -- SI 9500 for CDC 9766 */
