!
   Execute macros contained within the Q-reg's specified from the
   terminal.  An <ESC> will terminate the execution loop.

   Place this macro within a Q-reg other than O, then execute the
   Q-reg you specified.  Any Q-reg except O and the one containing
   this macro can be interactively executed.  (This is most useful
   when you use a TECO/SCROLL mode.)

   This macro has proven to be most useful when a one or more of a
   set of repeatitive operations must be performed on one or more 
   files.  The usual sequence of usage has been:

     1)	Do a TECO/SCR/IN EXEMAC.TEC to start up.

     2)	Do an HXPHK, loading the macro into Q-reg P.

     3)	Start up the (first) file to be processed.

     4)	Perform the operations to be performed, saving them into a
	Q-reg via a "*<q-reg>" after each operation, where <q-reg>
	is 1 thru 9.

     5)	Invoke this macro via the MP command.

     6)	Using the keypad, selectively execute the necessary macros
	by simply striking the appropriate numeric key.

     7)	Stop the macro execution by striking the <ESC> key.
!
<
  @^A/Q: / ^TUO
  QO-27"E @^A/ - Done/13^T10^T 0;'
  13^T10^T @^UO/M/ QO@:^UO//
  MO -1W
>