;PS/2 MCABase Adapter Database, 2007 ;=================================== AdapterID 05349h AdapterName "Invisible Network Model 200/A" NumBytes 2 nameditem Prompt "Adapter Memory Location" Choice "Segment D000-D7FF" pos[0]=10X0XXXXb mem 0d0000h-0d7fffh Choice "Segment D800-DFFF" pos[0]=11X0XXXXb mem 0d8000h-0dffffh Choice "Segment C800-CFFF" pos[0]=01X0XXXXb mem 0c8000h-0cffffh Choice "ROM Disabled" pos[0]=10X1XXXXb Help "This selects the memory address where the NETBIOS ROM is located. There are three memory locations that you can select. You can also disable the ROM if you prefer to use the RAM-based NETBIOS. If you have two Invisible Network cards installed, you must disable the ROM on one of the two cards. Use the F5=Previous and F6=Next keys to change this selection. Conflicting selections are marked with an asterisk and must be changed. Under normal circumstances, select ." nameditem Prompt "Adapter I/O Port Location" Choice "Port 5390-5397" pos[0]=XX1XXXXXb io 5390h-5397h Choice "Port 5290-5297" pos[0]=XX0XXXXXb io 5290h-5297h Help "This selects the address where the adapter I/O port is located. There are two addresses that you can select. Use the F5=Previous and F6=Next keys to change this selection. Conflicting selections are marked with an asterisk and must be changed. Under normal circumstances, select ." nameditem Prompt "DMA Arbitration Level" Choice "Level 0" pos[0]=XXXXXX1Xb arb 0 Choice "Level 1" pos[0]=XXXXXX0Xb arb 1 Help "This selects the DMA channel the adapter will use to transfer data. You can select Level 0 or Level 1. Level 0 has higher priority. Use the F5=Previous and F6=Next keys to change this selection. Conflicting selections are marked with an asterisk and must be changed. Under normal circumstances, select ." nameditem Prompt "Interrupt Level" Choice "IRQ 9" pos[0]=XXXXX0XXb int 9 Choice "IRQ 10" pos[0]=XXXXX1XXb int 10 Help "This selects the interrupt level the adapter will use to request service from the System Unit. You can select either IRQ 9 or IRQ 10. Use the F5=Previous and F6=Next keys to change this selection. Conflicting selections are marked with an asterisk and must be changed. Under normal circumstances, select ." nameditem Prompt "Network Speed" Choice "0.7 Mbps" pos[1]=00XXXXXXb Choice "1.4 Mbps" pos[1]=01XXXXXXb Choice "1.8 Mbps" pos[1]=11XXXXXXb Help "This selects the speed at which the network transfers data. You can select 1.8 Mbps, 1.4 Mbps, or 0.7 Mbps (million bits per second). All the computers in your network must be set to operate at the same speed. If you have any Invisible Network Model 100 or Model 1 cards, you must select 0.7 Mbps. If all your Invisible Network cards are Model 200 or Model 200/A, you can select any of the three speeds. The maximum length of the network cable depends on the speed selected: 1000 feet at 1.8 Mbps, 2000 feet at 1.4 Mbps, or 1300 feet at 0.7 Mbps. Use the F5=Previous and F6=Next keys to change this selection." nameditem Prompt "Master or Non-Master" Choice "Non-Master" pos[0]=XXXX0XXXb Choice "Master" pos[0]=XXXX1XXXb Help "One computer in your network must be selected to act as the Master station. All other computers must be Non-Masters. The Master station must have the highest Station Address in the network. The Master must be powered on in order for the network to operate. Example: If you have three computers, you should assign them Station Addresses 0, 1, and 2, with station 2 being the Master station. Use the F5=Previous and F6=Next keys to change this selection." nameditem Prompt "Station Address" Choice " 0" pos[1]=XX111111b Choice " 1" pos[1]=XX111110b Choice " 2" pos[1]=XX111101b Choice " 3" pos[1]=XX111100b Choice " 4" pos[1]=XX111011b Choice " 5" pos[1]=XX111010b Choice " 6" pos[1]=XX111001b Choice " 7" pos[1]=XX111000b Choice " 8" pos[1]=XX110111b Choice " 9" pos[1]=XX110110b Choice "10" pos[1]=XX110101b Choice "11" pos[1]=XX110100b Choice "12" pos[1]=XX110011b Choice "13" pos[1]=XX110010b Choice "14" pos[1]=XX110001b Choice "15" pos[1]=XX110000b Choice "16" pos[1]=XX101111b Choice "17" pos[1]=XX101110b Choice "18" pos[1]=XX101101b Choice "19" pos[1]=XX101100b Choice "20" pos[1]=XX101011b Choice "21" pos[1]=XX101010b Choice "22" pos[1]=XX101001b Choice "23" pos[1]=XX101000b Choice "24" pos[1]=XX100111b Choice "25" pos[1]=XX100110b Choice "26" pos[1]=XX100101b Choice "27" pos[1]=XX100100b Choice "28" pos[1]=XX100011b Choice "29" pos[1]=XX100010b Choice "30" pos[1]=XX100001b Choice "31" pos[1]=XX100000b Choice "32" pos[1]=XX011111b Choice "33" pos[1]=XX011110b Choice "34" pos[1]=XX011101b Choice "35" pos[1]=XX011100b Choice "36" pos[1]=XX011011b Choice "37" pos[1]=XX011010b Choice "38" pos[1]=XX011001b Choice "39" pos[1]=XX011000b Choice "40" pos[1]=XX010111b Choice "41" pos[1]=XX010110b Choice "42" pos[1]=XX010101b Choice "43" pos[1]=XX010100b Choice "44" pos[1]=XX010011b Choice "45" pos[1]=XX010010b Choice "46" pos[1]=XX010001b Choice "47" pos[1]=XX010000b Choice "48" pos[1]=XX001111b Choice "49" pos[1]=XX001110b Choice "50" pos[1]=XX001101b Choice "51" pos[1]=XX001100b Choice "52" pos[1]=XX001011b Choice "53" pos[1]=XX001010b Choice "54" pos[1]=XX001001b Choice "55" pos[1]=XX001000b Choice "56" pos[1]=XX000111b Choice "57" pos[1]=XX000110b Choice "58" pos[1]=XX000101b Choice "59" pos[1]=XX000100b Choice "60" pos[1]=XX000011b Choice "61" pos[1]=XX000010b Choice "62" pos[1]=XX000001b Choice "63" pos[1]=XX000000b Help "This selects the Station Address. You can select any address from 0 to 63. Each computer in your network must have a different Station Address, and the Master station must have the highest address. Example: If you have three computers, you should assign them Station Addresses 0, 1, and 2, with station 2 being the Master station. Use the F5=Previous and F6=Next keys to change this selection."