AdapterId 06028h

AdapterName  "UCPIO-12 Parallel Port Interface"

NumBytes 2

NamedItem
   Prompt "Interrupt Level"
      choice "Disabled" pos[0]=0000000Xb
      choice " 3" pos[0]=0011000Xb int 3
      choice " 4" pos[0]=0100000Xb int 4
      choice " 5" pos[0]=0101000Xb int 5
      choice " 6" pos[0]=0110000Xb int 6
      choice " 7" pos[0]=0111000Xb int 7
      choice " 9" pos[0]=1001000Xb int 9
      choice "10" pos[0]=1010000Xb int 10
      choice "11" pos[0]=1011000Xb int 11
      choice "12" pos[0]=1100000Xb int 12
      choice "14" pos[0]=1110000Xb int 14
      choice "15" pos[0]=1111000Xb int 15

   Help
"If your interrupt handler software is designed for chaining, it may share 
a level with another adapter, otherwise the selected level should be dedicated 
to the UCPIO-12 only. Interrupt levels 4 (COM1:), 3 (COM2:) and 6 (floppy 
disk) can be shared, but are generally best avoided.    "

NamedItem
  Prompt "Base Address"
      choice "0300 Hex"  pos[1]=00000011b  io 0300h-030Fh
      choice "0400 Hex"  pos[1]=00000100b  io 0400h-040Fh
      choice "0500 Hex"  pos[1]=00000101b  io 0500h-050Fh
      choice "0800 Hex"  pos[1]=00001000b  io 0800h-080Fh
      choice "0F00 Hex"  pos[1]=00001111b  io 0F00h-0F0Fh
      choice "1000 Hex"  pos[1]=00010000b  io 1000h-100Fh
      choice "1500 Hex"  pos[1]=00010101b  io 1500h-150Fh
      choice "1800 Hex"  pos[1]=00011000b  io 1800h-180Fh
      choice "1F00 Hex"  pos[1]=00011111b  io 1F00h-1F0Fh
      choice "2000 Hex"  pos[1]=00100000b  io 2000h-200Fh
      choice "3000 Hex"  pos[1]=00110000b  io 3000h-300Fh
      choice "4000 Hex"  pos[1]=01000000b  io 4000h-400Fh
      choice "8000 Hex"  pos[1]=10000000b  io 8000h-800Fh
      choice "A000 Hex"  pos[1]=10100000b  io 0A000h-0A00Fh
      choice "F000 Hex"  pos[1]=11110000b  io 0F000h-0F00Fh
      choice "FF00 Hex"  pos[1]=11111111b  io 0FF00h-0FF0Fh

   Help
"Choose a base I/O address that does not conflict with another adapter.  
Setup allows you 16 possible choices although the UCPIO-12 is capable of
255 I/O addresses (XX00H).  If you need an address option that is not listed, 
run GENADF.EXE.  Setup will automatically warn you of any adapter I/O address 
conflicts.    "