AdapterId 06EFFh

AdapterName  "CLEO MC/201/212AT Modem"

NumBytes 1

NamedItem
        Prompt "I/O Address Range"
      choice "260h - 26Fh"  pos[0]=00XXXXXXb  io 0260h-026Fh
      choice "660h - 66Fh"  pos[0]=10XXXXXXb  io 0660h-066Fh
      choice "A60h - A6Fh"  pos[0]=01XXXXXXb  io 0A60h-0A6Fh
      choice "E60h - E6Fh"  pos[0]=11XXXXXXb  io 0E60h-0E6Fh
   Help
"The CLEO MC/201/212AT Modem can be configured to operate
at one of four Input/Output Address Ranges.  This allows
up to four modems to be installed in the system at the same
time.  The default address range is 260h-26Fh."

NamedItem
        Prompt "Interrupt Request Level"
      choice "IRQ 3"  pos[0]=XX0001XXb  int 3
      choice "IRQ 4"  pos[0]=XX0011XXb  int 4
      choice "IRQ 5"  pos[0]=XX0101XXb  int 5
      choice "IRQ 6"  pos[0]=XX0111XXb  int 6
      choice "IRQ 7"  pos[0]=XX1001XXb  int 7
      choice "IRQ 9/2"  pos[0]=XX1011XXb  int 9
      choice "IRQ 10"  pos[0]=XX1101XXb  int 10
      choice "IRQ 11"  pos[0]=XX1111XXb  int 11
      choice "No IRQ"  pos[0]=XX0000XXb
   Help
"The CLEO MC/201/212AT Modem can be configured to operate
on one of eight Interrupt ReQuest levels (IRQs).  The
default is IRQ 3.  You may also choose to disable
interrupts on any level."

NamedItem
         Prompt "Phase Shift"
      choice "BELL 201 (United States)"  pos[0]=XXXXXX1Xb
      choice "CCITT V.26A (Europe)"      pos[0]=XXXXXX0Xb
   Help
"The CLEO MC/201/212AT Modem can be configured to operate
at one of two different phase shifts.  Select BELL if the
modem is to be used in the U.S.  Select CCITT if the modem
is to be used in Europe.  The default phase shift select
is BELL (United States)."