AdapterId 07CEDh

AdapterName "OS/RAM8 Memory Adapter, Capital Equipment Corp. 01000-61220"

NumBytes 4
FixedResources pos[3]=11x1xxxxb

NamedItem
Prompt "BIOS ROM Address"
 choice "Segment_c800" pos[1]=xxxx0100b mem 0c8000h-0c9fffh
 choice "Segment_ca00" pos[1]=xxxx0101b mem 0ca000h-0cbfffh
 choice "Segment_cc00" pos[1]=xxxx0110b mem 0cc000h-0cdfffh
 choice "Segment_ce00" pos[1]=xxxx0111b mem 0ce000h-0cffffh
 choice "Segment_d000" pos[1]=xxxx1000b mem 0d0000h-0d1fffh
 choice "Segment_d200" pos[1]=xxxx1001b mem 0d2000h-0d3fffh
 choice "Segment_d400" pos[1]=xxxx1010b mem 0d4000h-0d5fffh
 choice "Segment_d600" pos[1]=xxxx1011b mem 0d6000h-0d7fffh
 choice "Segment_d800" pos[1]=xxxx1100b mem 0d8000h-0d9fffh
 choice "Segment_da00" pos[1]=xxxx1101b mem 0da000h-0dbfffh
 choice "Segment_dc00" pos[1]=xxxx1110b mem 0dc000h-0ddfffh
 choice "Segment_de00" pos[1]=xxxx1111b mem 0de000h-0dffffh
 Help
"Select the BIOS ROM memory address.
The BIOS ROM contains code which initializes the adapter when the
computer is turned on.
This address can be set anywhere in the range just above
the video RAM area."

NamedItem
Prompt "Serial port #1 I/O Address"
 choice "Port_3f8" pos[1]=0011xxxxb io 03f8h-03ffh int 4 
 choice "Port_2f8" pos[1]=0001xxxxb io 02f8h-02ffh int 4 
 choice "Port_2e8" pos[1]=0000xxxxb io 02e8h-02efh int 4 
 choice "Port_3e8" pos[1]=0010xxxxb io 03e8h-03efh int 4 
 choice "Port_12e8" pos[1]=0100xxxxb io 012e8h-012efh int 4 
 choice "Port_12f8" pos[1]=0101xxxxb io 012f8h-012ffh int 4 
 choice "Port_13e8" pos[1]=0110xxxxb io 013e8h-013efh int 4 
 choice "Port_13f8" pos[1]=0111xxxxb io 013f8h-013ffh int 4 
 choice "Port_22e8" pos[1]=1000xxxxb io 022e8h-022efh int 4 
 choice "Port_22f8" pos[1]=1001xxxxb io 022f8h-022ffh int 4 
 choice "Port_23e8" pos[1]=1010xxxxb io 023e8h-023efh int 4 
 choice "Port_23f8" pos[1]=1011xxxxb io 023f8h-023ffh int 4 
 choice "Port_32e8" pos[1]=1100xxxxb io 032e8h-032efh int 4 
 choice "Port_32f8" pos[1]=1101xxxxb io 032f8h-032ffh int 4 
 choice "Port_33e8" pos[1]=1110xxxxb io 033e8h-033efh int 4 
 choice "Port_33f8" pos[1]=1111xxxxb io 033f8h-033ffh int 4 
 Help
"Select the desired I/O address.
Use the F5=Previous and F6=Next keys to change the selection."

NamedItem
Prompt "  Enable handshake for serial port #1"
 choice "Yes" pos[0]=x1xxxxxxb
 choice "No"  pos[0]=x0xxxxxxb
 Help
"Enable or disable the handshake lines (CTS,DSR,DCD) for serial port #1.
These inputs help to keep the computer from sending data faster than
the device can receive it - but some devices do not support them.
Use the F5=Previous and F6=Next keys to change the selection."

NamedItem
Prompt "Serial port #2 I/O Address"
 choice "Port_2f8" pos[2]=xxxx0001b io 02f8h-02ffh int 3 
 choice "Port_2e8" pos[2]=xxxx0000b io 02e8h-02efh int 3 
 choice "Port_3e8" pos[2]=xxxx0010b io 03e8h-03efh int 3 
 choice "Port_12e8" pos[2]=xxxx0100b io 012e8h-012efh int 3 
 choice "Port_12f8" pos[2]=xxxx0101b io 012f8h-012ffh int 3 
 choice "Port_13e8" pos[2]=xxxx0110b io 013e8h-013efh int 3 
 choice "Port_13f8" pos[2]=xxxx0111b io 013f8h-013ffh int 3 
 choice "Port_22e8" pos[2]=xxxx1000b io 022e8h-022efh int 3 
 choice "Port_22f8" pos[2]=xxxx1001b io 022f8h-022ffh int 3 
 choice "Port_23e8" pos[2]=xxxx1010b io 023e8h-023efh int 3 
 choice "Port_23f8" pos[2]=xxxx1011b io 023f8h-023ffh int 3 
 choice "Port_32e8" pos[2]=xxxx1100b io 032e8h-032efh int 3 
 choice "Port_32f8" pos[2]=xxxx1101b io 032f8h-032ffh int 3 
 choice "Port_33e8" pos[2]=xxxx1110b io 033e8h-033efh int 3 
 choice "Port_33f8" pos[2]=xxxx1111b io 033f8h-033ffh int 3 
 choice "Port_3f8" pos[2]=xxxx0011b io 03f8h-03ffh int 3 
 Help
"Select the desired I/O address.
Use the F5=Previous and F6=Next keys to change the selection."

NamedItem
Prompt "  Enable handshake for serial port #2"
 choice "Yes" pos[0]=1xxxxxxxb
 choice "No"  pos[0]=0xxxxxxxb
 Help
"Enable or disable the handshake lines (CTS,DSR,DCD) for serial port #2.
These inputs help to keep the computer from sending data faster than
the device can receive it - but some devices do not support them.
Use the F5=Previous and F6=Next keys to change the selection."

NamedItem
Prompt "Expanded memory map I/O Address"
 choice "Port_248" pos[2]=0000xxxxb io 0248h-024fh 
 choice "Port_258" pos[2]=0001xxxxb io 0258h-025fh 
 choice "Port_348" pos[2]=0010xxxxb io 0348h-034fh 
 choice "Port_358" pos[2]=0011xxxxb io 0358h-035fh 
 choice "Port_1248" pos[2]=0100xxxxb io 01248h-0124fh 
 choice "Port_1258" pos[2]=0101xxxxb io 01258h-0125fh 
 choice "Port_1348" pos[2]=0110xxxxb io 01348h-0134fh 
 choice "Port_1358" pos[2]=0111xxxxb io 01358h-0135fh 
 choice "Port_2248" pos[2]=1000xxxxb io 02248h-0224fh 
 choice "Port_2258" pos[2]=1001xxxxb io 02258h-0225fh 
 choice "Port_2348" pos[2]=1010xxxxb io 02348h-0234fh 
 choice "Port_2358" pos[2]=1011xxxxb io 02358h-0235fh 
 choice "Port_3248" pos[2]=1100xxxxb io 03248h-0324fh 
 choice "Port_3258" pos[2]=1101xxxxb io 03258h-0325fh 
 choice "Port_3348" pos[2]=1110xxxxb io 03348h-0334fh 
 choice "Port_3358" pos[2]=1111xxxxb io 03358h-0335fh 
 Help
"Select the desired I/O address.
Use the F5=Previous and F6=Next keys to change the selection."

NamedItem
Prompt "Amount of extended memory (megabytes)"
 choice "ALL" pos[0]=xx11111xb
 choice "0" pos[0]=xx00000xb
 choice "0.5" pos[0]=xx00001xb
 choice "1" pos[0]=xx00010xb
 choice "1.5" pos[0]=xx00011xb
 choice "2" pos[0]=xx00100xb
 choice "2.5" pos[0]=xx00101xb
 choice "3" pos[0]=xx00110xb
 choice "3.5" pos[0]=xx00111xb
 choice "4" pos[0]=xx01000xb
 choice "4.5" pos[0]=xx01001xb
 choice "5" pos[0]=xx01010xb
 choice "5.5" pos[0]=xx01011xb
 choice "6" pos[0]=xx01100xb
 choice "6.5" pos[0]=xx01101xb
 choice "7" pos[0]=xx01110xb
 choice "7.5" pos[0]=xx01111xb
 Help
"Choose the amount of adapter memory to be assigned as extended
memory.  Any remaining memory will be used as DOS expanded
memory (Lotus-Intel-Microsoft EMM 4.0), if the expanded memory
driver is installed with DOS.
For operating systems other than DOS, choose ALL extended
memory."