 
 Runstream (R) XGA/XGA-2 XGA208 Windows 95/98 Display Driver
 Copyright (C) UnalZ, 2008 for Runstream & PS/2 MCABASE
 --------------------------------------------------------------
 Beta Test XGA208                            unalz@mail333.com
 
   Driver Build:  April 28, 2008
   ------------------------------
   XGA208 Final Release
    
 
   This document describes the XGA208 display driver installation
   procedures for Windows 95/98.
   
   For additional information and test reports see README.TXT.

 
   CONTENTS
  
   1. Before You Start
   2. Multiple XGA/XGA-2 Adapters
   3. Driver Installation Procedure
   4. Display Problems
 
 1. BEFORE YOU START

   You need a MicroChannel machine with an XGA or XGA-2 display adapter
   and the Windows 95/98 operating system. 
   
   The XGA206/208 drivers are an UPDATE of the Windows XGA driver. You must
   have either the Windows 95/98 XGA driver or the XGA206 driver installed
   before you update it with XGA208.

   If you have not defined a monitor type or your monitor is unsupported,
   select a monitor which most closely matches your monitor'r resolution.
   Windows will hide XGA208 high resolution modes if the defined monitor
   does not support them.
   
   To differentiate between the Windows XGA driver and the XGA208
   driver, the installable display types have been defined as:

   "IBM XGA MCA"    = IBM XGA Display Adapter with the XGA208 driver.
   "IBM XGA-2 MCA"  = IBM XGA-2 Display Adapter with the XGA208 driver.

   The Windows XGA driver defines the XGA and XGA-2 display types
   as "IBM XGA" and "IBM XGA-2".
   

 2. MULTIPLE XGA/XGA-2 ADAPTERS
   
   If you have multiple XGA or XGA-2 adapters, only one adapter will be 
   supported. The adapter selection rules are as follows:

    * Planar XGA-2 and one XGA/XGA-2 display adapter in an extension slot.
       
         The adapter in the extension slot is used.
       
    * Planar XGA-2 and multiple XGA/XGA-2 display adapters in extension slots.
    
         The adapter in the LOWEST numbered extension slot used.
         
    * Multiple XGA/XGA-2 display adapters in extension slots.
    
         The adapter in the LOWEST numbered extension slot will be used.

   The additional XGA-2 adapters are not disabled.
   

 3. DRIVER INSTALLATION PROCEDURE
     
   Click Start, then Settings, then Control Panel.

   Start the "Display" applet program. 

   Select the "Settings" page, push the "Change Display Type" button.

   Push the "Change" button in the "Adapter Type" area.

   Push the "Have Disk" button and press "OK".

   Specify the path to the driver files and press the <ENTER> key.

       Example 1: Insert the drivers disk in the A: floppy drive,
                  and enter A:\.

       Example 2: Type in the name of the directory where you copied
                  the drivers, either on your local hard drive or
                  on a network share.

       Example 3: If you're not sure exactly where the drivers are,
                  choose the "Browse..." button and find them.

   The "Select Device" dialog box will appear. Select the adapter that
   corresponds to the one you installed in your machine and click OK.
   
   Windows  will copy the display drivers to the proper directories
   on your system.
   
   Continue choosing Close until asked to restart your machine from the
   "Systems Settings Change" dialog box.
   
   After the system has restarted, you can go back into the Display applet
   and select the desired display resolution and color depth.
   

 4. DISPLAY PROBLEMS

   If you experience problems with your current display settings and are
   unable to change or restore them, start Windows in safe mode and apply
   the display mode changes:
   
        Reboot or restart Windows. 
        
        Upon seeing the line "Windows 95 is loading...." press F8. 
    
        Select option 3 from the menu, Safe mode. 
        
        Start the "Display" applet program. 
        
        Select the desired color depth or resolution.
        
        Restart Windows.
        
   Use the described procedure to reinstall the XGA208 display driver or 
   the Windows XGA driver.
   
END. 

