Moxa Windows 2000 drivers Installation Guide

Last Update: Mar. 9,2000

First time installation

ISA Boards
1. Enter [Control Panel][System][Hardware Wizard].
2. Select "Add/Troubleshoot....". Press Next to start Searching.
3. Select "Add a new device" and press Next.
4. Select "No, select from hardware list.".
5. Select "Multiport serial adapters" in hardware type. Press Next.
6. Press "Have Disk".
7. Please select proper directory for correct driver. You may refer 
   to content.txt for more detail.
8. Press "OK" to install driver and further configuration.
9. Please go into the [Device Manager] to check the board's resource.
   The resource is assigned with default setting. If not macth, please
   modify and reboot.
9. End.

PCI Boards
1. Plug the PCI board into the system.
2. System will automatically find the hardware.
3. Select "Floppy" and specify driver directory in Search Proper Device Driver.
   For example, if you're installing C320Turbo, the driver directory is
   d:/win2000/intellio. For more information, please refer to content.txt
   in d:/win2000.
4. The driver will be automatically copied into system.
5. The system will find the new hardware for each port. Please specify the 
   same directory.
6. When the "Found new hardware" dialog closed, the Moxa board is installed 
   completely.
7. End. 

- End -