HOW TO RUN A PCMCIA-MODEM UNDER OS/2 2.1 ON A 3151
==================================================

1st : 	Copy the "COM.SYS" and "VCOM.SYS" from the COM_OS2 directory on this 
	disk to the OS2 directory on your HDD (only if they are newer).
2nd :	Add the following line to your OS/2 "CONFIG.SYS" :
	"DEVICE=C:\OS2\KITOS2.SYS (return)"
3rd :	Copy the "KITOS2.SYS"-file from the ATT_PARA directory on this disk 
	to the OS2 directory on your HDD.
4th :	Open a OS/2 Dos box from your OS/2-Desktop and run "INSTALL.EXE" from
	the OS2PCM dirrectory on this disk.
	Select "NCR-SAFARI" from the menu and push OK.
5th :	Check your OS/2 "CONFIG.SYS". Make sure the line "REM Begin of PCMCIA
	Installation" really starts with a new line.
6th :	Reboot your system.
7th :	Open the "CONFIGURATION MANAGER" (that's the ICON with the rainbow),
	choose CUSTOMIZE and enable "Start up when": CARD INSERTED and CARD
	REMOVED.
8th :	Make sure (with CONFIGURATION MANAGER) which COM your modem uses and
	select this COM in your terminal program.

That's all.

And have a nice DOS.
