DISKFWMK.ZIP

st_hawk.bin   = Seagate Hawk firmware image (ST32430, ST32130)   ver 0712
st_hawk.tms   = Seagate Hawk servo image    (ST32430, ST32130)   ver 9570
st_2barr.bin  = Seagate 2GB Barracuda image (ST32550)            ver 0910
st_4barr.bin  = Seagate 4GB Barracuda image (ST15150)            ver 0908
st34371.img   = Seagate ST32171/ST34371 firmware image           ver 0512
st34572w.img  = Seagate ST34572W firmware image                  ver 0876
st19171.img   = Seagate 9GB image (ST19171)                      ver 0024
st19171d.img  = Seagate 9GB image (ST19171) debug ver            ver DB32
st34573w.img  = Seagate ST34573W firmware image                  ver 6609
st118273.img  = Seagate 18GB image (ST118273)                    ver 6609
st39173.img   = Seagate 9GB firmware image (ST39173)             ver 6621
st39173.tms   = Seagate 9GB servo image (ST39173)                ver 6015
st34520w.img  = Seagate 4.5G Medalist (ST39140 & ST34520)        ver 1497
st39140w.img  = Seagate 9GB Medalist (ST39140 & ST34520)         ver 1497
st39102.img   = Seagate 9GB 10K LVD firmware (ST39102)           ver 0005
bcq01423.img  = Conner 2/4GB firmware image (CFP2107, CFP4207)   ver 1423
tcmar195.img  = WangDAT Model 3400DX firmware image              ver 0195
att442e.fup   = DEC 2GB DSP3210S                              FW ver 442E
l4pl442.fup   = DEC 1GB DSP3107LS                             FW ver 442 
t392_ncr.fup  = DEC 1GB DSP3105S                              FW ver T392
imlst23f.bin  = IBM 2GB DFHSS2F & 4GB DFHSS4F drives          FW ver 3636
ibmfw.txt     = Special instructions for IBM drives 

fwhdr.exe     = DISKFW3 firmware header utility
dl.exe        = DISKFW3 download program  ver 1.86
dwnldus.hlp   = DISKFW3 text messages and firmware filenames

To make DISKFW3-ready images from a raw firmware image, run
  fwhdr <filename> <vendor> <product> <rev>

To update an existing disk firmware image, use the filename already
given in the table above (and in dwnldus.hlp).

To add a new disk's firmware image, you can either:
  a) choose the filename according to the convention,
     [SCSI Product ID, 8 chars max].IMG (e.g.: st34573w.img), or
  b) update the dwnldus.hlp table with a new entry and filename.

To add an entry to the table in dwnldus.hlp, add lines to the table 
in dwnldus.hlp with the following information:
  <vendor>
  <product>
  <filename>
(See the "SEAGATE" and "WangDAT" examples.)
Then "copy /b dl.exe+dwnldus.hlp download.exe" to update the program.

Now copy the new download.exe and the new *.img file to the diskette.
You may have to delete other firmware images to allow enough space.

Note that to get disk firmware for NCR Symbios RAID devices, you should 
go to ftp://diskt1.sandiegoca.ncr.com/pub/released/drive/.