DACMSEL - a utility to set mode pages via the Mylex DAC960 adapter in NT.

 dacmsel.exe - the DACMSEL utility ver 4.03,  07/01/99  71,680 bytes

This utility uses MDF files (e.g. st32171w.mdf, st34573w.mdf, etc.) to
set the mode pages for each disk model.  The current *.mdf files are
available on the PREPDISK diskette at
    http://www3.ncr.com/support/nt/devices/disks/prepdisk.zip

This version of DACMSEL runs with either version 4.x or 5.x of the Mylex
driver.  Note that if you use this utility with Mylex dac960nt.sys 
version 5.00 or greater, you will also need to install GAM Server.
The Mylex driver version can be seen via Explorer/Properties for 
\winnt\system32\drivers\dac960nt.sys.

TO USE THIS UTILITY:

The MDF files should be placed in the same directory as DACMSEL.EXE.
The utility can be run to automatically update all drives by entering
   dacmsel -a
A log is produced in that directory as dacmsel.log.

If no parameters are specified, it shows 4 interactive options:
   1. Read Device Mode Pages
   2. Set Mode Pages via MDF files
   3. Modify Mode Page 1C to disable SMART
   4. Get SCSI Device Info 
Option 2 is interactive and will ask Y/N if each drive should be updated.